Ineltro AG
Riedthofstrasse 100
CH-8105 Regensdorf
Tel. +41 43 343 73 00
Fax +41 43 343 73 09
E-Mail: contact@ineltro.ch
Telegesis
Telegesis manufacture a full range of OEM ZigBee modules. Our modules comprise a World leading ZigBee Chip from Ember Corp, antenna and a highly functional, AT command layer. Telegesis modules allow designers to easily add ZigBee functionality. Telegesis provide everything needed for a successful ZigBee design.
Products
¹ETRX35x Ember ARM® Cortex-M3 based low-power 2.4GHz Zigbee module
²ETRX2 Ember EM250 based low-power 2.4GHz Zigbee module
²ETRX2CF CF/PCMCIA to serial bridge connected to an ETRX2 Zigbee module
²ETRX2USB High performance, low power 2.4GHz ISM band transceiver in a USB Stick form factor
²EAP-E The Ethernet Access Point is a “gateway” allowing access to ETRX2 mesh networking
modules via an industry standard Ethernet IP Network
²Router-E The Telegesis Router-E enables increased distance between nodes in a ZigBee network
ETRX-UMI ETRX3 based Zigbee module meeting the new UMI (Universal Metering Standard).
¹ Available as Long-Range Version with an added PA and LNA for highest possible link budget.
(ETRX35x-LR)
² Available as Long-Range Version with Power Amplifier (Partnr.-PA)
Development Kits
ETRX3 based development kit coming soon! (Ask for availability)
Latest Products:
ETRX357DVK Development Kit
The ETRX357-DVK development kit is an ideal starting point for development and evaluation of the ETRX357 2.4GHz ZigBee modules. The ETRX357 is based on the third generation Ember EM357 ZigBee SOC offering the highest wireless networking performance and application code space at low power consumption. The modules' unique AT-style command line interface allows designers to quickly integrate ZigBee technology without complex software engineering. For custom application development the ETRX35x development kits integrate with ease into Embers InSight development environment.
Development Kit Features
• ZigBee Networking “Out-of-the-Box”
• Low cost evaluation platform for ZigBee wireless mesh networking
• Broad selection of modules allows range testing of any possible module/antenna combination.
• Set up a ZigBee mesh network in a few minutes without the need for any embedded software
• The downloadable Telegesis Terminal application offers easy interface to modules on the development
boards.
• Development boards can be used as hardware platform for trials
• Also works with 3rd party terminal software like HyperTerminal.
• Battery option allows easy prototyping of end devices
• Seamlessly Integrates into the Ember InSight Toolchain
• USB Drivers available for Windows, MAC OS and Linux
Development Kit Contents
• 3 x USB Development Boards
• 2 x ETRX357 on Carrier-Board
• 2 x ETRX357HR on Carrier-Board
• 2 x ETRX357LR on Carrier-Board
• 2 x ETRX357HR-LR on Carrier-Board
• 1 x ETRX2USB stick
• 2 x Large Antenna
• 2 x Small Stubby Antenna
• 3 x USB Cable
Development Board Features
• Power can be supplied via USB, Power Jack or on board
battery holder (2xAAA)
• Light and Temperature sensor
• Breakout of all GPIO pins
• Access to the Ember InSight Port
• Reset and Bootload Button
• 4 x Buttons, 2 x LEDs, 1 x Buzzer
• USB to Serial converter
ETRX3 ZigBee Module
from The ETRX3 series is the 3rd generation of advanced ZigBee modules from Telegesis and the first module family on the market to feature the EM357 and EM351- the latest ARM® Cortex M-3 SOC's Ember.
Features
• EM300 series ZigBee SOC featuring 32-bit ARM® Cortex-M3
processor
• Dimensions 19mm x 25 mm x 3 mm
• Up to 192k of Flash, 12k of RAM
• Estimated RX Sensitivity -99dBm (-100dBm Boost)
• Estimated TX Power 3dBm (5dBm Boost)
• 105dB link Budget
• Est Current Consumption: 20% better compared to ETRX2
• 128µS Wakeup
• Improved Hardware MAC Acceleration
• JTAG Interface for Programming and Debugging
• Improved Peripherals (ADC, timers etc.)
• Chip Antenna and U.FL coaxial Connector
• FCC Approval, tested for European Regulations
ETRX-UMI - The first ZigBee module on the market meeting the new UMI (Universal Metering Standard).
UMI (Universal Metering Interface) is a new, low power hardware interface standard developed by Cambridge Consultants to simplify and ease the design of Smart Meters. UMI is primarily aimed at smart metering applications such as:
• Meters (Electricity, Gas, Water, and Heat)
• Energy Displays
• Gateway Devices.
The UMI standard separates meter metrology and communication functions into separate modules with a wired connection between them. This separation is valuable as metrology standards such as MID in Europe are stable and Meter OEMs can be faced with the need to provide a selection of communications standards.
Meter OEMs can now develop‘Smart-Ready' approved meters by including one or more UMI Ports andwhen ZigBee support is required the Telegesis ETRX-UMI communication module can be fitted to the meter or alternatively a Gateway or In Home Display.UMI uses a star network topology similar to USB but with much lower power consumption and in some ways UMI can be compared to a ruggedversion of the SD card interface. Telegesis have over four years of experience and dedication to ZigBeehave taken the latest evolution of their ZigBee Module technology the ETRX3 series and applied it to the design of the ETRX-UMI module.
ETRX-UMI Specification
• 32 bit ARM Cortex M3 (@1.2V)
• ZigBee SOC EM357
• 192k of Flash, 12k of RAM
• 108dB link Budget
• Dimensions 50 mm x 40 mm
• Improved Hardware MAC Acceleration
• JTAG Interface for Programming and Debugging
• Chip Antenna
